configure VRF or VPN instance on a HP H3C series

#
ip vpn-instance demo
route-distinguisher 1:1
description demo
#
interface GigabitEthernet2/0/1 (or vlan interface)
description Int to cust demo
ip binding vpn-instance demo
#

ip route-static vpn-instance demo 0.0.0.0 0.0.0.0 10.10.10.1

Linux bonding modes

Mode 0: Balance Round-Robin (balance-rr)
Round-robin policy: Transmit packets in sequential order from the first available slave through the
last. This mode provides load balancing and fault tolerance.

Mode 1: Active-Backup
Active-backup policy: Only one slave in the bond is active. A different slave becomes active if, and only if, the active slave fails. The bond’s MAC address is externally visible on only one port (network adapter) to avoid confusing the switch.In bonding version 2.6.2 or later, when a failover occurs in active-backup mode, bonding will issue one or more gratuitous ARPs on the newly active slave. One gratuitous ARP is issued for the bonding master interface and each VLAN interfaces configured above
it, provided that the interface has at least one IP address configured. Gratuitous ARPs issued for VLAN interfaces are tagged with the appropriate VLAN id.This mode provides fault tolerance. The primary option, documented below, affects the behavior of this mode.

Category Archives: HP

configure VRF or VPN instance on a HP H3C series

Linux bonding modes

add new certificate CA to HP onboard administrator

Categories